DeWalt DCN692P2-XE XR 18V Li-Ion Cordless 30-34° Framing Nailer Gun 5.0Ah Kit

DeWalt DCN692N-XE 18V XR Li-ion Brushless 2-Speed Framing Nailer

Includes:

• 1 x Reversible belt hook
• 1 x Non-mark tip

Features:

• 18V XR Li-Ion Two Speed Framing Nailer featuring BRUSHLESS motor technology
• Two speeds – or power levels – to optimize the nailer for firing all lengths of nails
• Benefit from longer run-time, quicker readiness to fire, less recoil and more durability when firing short nails
• BRUSHLESS motor technology offers the power to fire a 90mm Ring Shank nail in Soft Wood and 63mm into Hard Woods
• The sequential operating mode allows for precision placement and the bump operating mode provides the user with production speed
• Mechanical rather than gas operation offers consistent performance at temperature between -20 and 50 degrees Celsius and minimal cleaning/service requirements
• Class leading vibration and sound figures, offer fantastic user protection
• Versatile 30 – 34 degree magazine angle will accept most clipped head, and off centre round head paper tape or wire weld collated framing nails
• Reversible belt/rafter hook provides increased portability and versatility on the job-site
• Depths can be easily adjusted using the thumb wheel depth adjuster
• Increased visibility and durability along with protection for work-surface from the non-mar contact-trip
• Ergonomic tool design allows the nailer to fit easily between a 400mm center stud
• Gas free operation offers a significant saving in running costs
• Tool free stall/jam clearance minimizes user down time
• Cordless design allows you to work without the inconvenience and safety risk of trailing leads
• User can engage contact trip lock-off and prevent accidental dis-charge of fastener
• Dry fire lockout ensures that the tool is protected from firing without nails in the magazine

Specifications:

• Voltage: 18V
• Nail diameter: 2.8mm – 3.3mm
• Magazine angle: 30° – 34°
• Nail length: 50mm – 90mm
• Magazine capacity: up to 55 nails
• Magazine loading: Rear – load
• Firing mode: Bump & Sequential
• Nailer operating mode: Selective
• Integrated belt hook: Yes
• Jam clearing: Yes
• Impact energy (EPTA 05/2009): 105J
• Temperature range: -20° to 50°C
• Fault indicator: Yes
• Dimensions (L x W x H): 345mm x 125mm x 338mm
• Weight: 4.1kg

Warranty:

• 3 Years Warranty Covered By Dewalt Australia

DeWalt DCB184-XE 18V 5.0Ah XR Li-Ion Cordless Slide Battery

Features:

• Deliver 66% more runtime than a standard 3.0Ah battery pack
• LED state of charge indicator to help manage pack charging
• Lightweight design that provides the user with upgraded 5.0Ah power without increasing the size or weight over the 18V 3.0Ah battery pack
• No memory effect and virtually no self-discharge for maximum productivity & less downtime
• Protection against overheating, overloading and deep discharge conditions which increases the overall battery life
• Compatible with all DEWALT XR Li-Ion 18V Tools

Specifications:

• Voltage: 18V
• Battery type: Slide
• Amps: 5.0Ah
• Weight: 0.6kg

Warranty:

• 3 Years Warranty Covered By Dewalt Australia

DeWalt DCB115-XE 18V Multi-voltage Charger

The DCB115-XE is easy to use, quiet and exceptionally stable, this DeWalt charger plugs directly into the wall. The DCB115-XE features a built-in diagnostics system with an LED indicator that communicates battery charging, battery charged, power line problem, replace battery and battery too hot or cold to charge.

Features:

• Compatible with DeWalt 10.8V, 14.4V and 18V Li-ion slide batteries
• Diagnostics with LED indicator for battery charge status of charged, charging, power line problem, replace pack or battery temperature problem
• Wall mountable design

Specifications:

• Voltage: 10.8V, 14.4V, 18V
• Battery Chemistry: Li-ion
• Dimensions (L X W X H): 120mm x 150mm x 100mm
• Weight: 1kg

Warranty:

• 3 Years Warranty Covered By Dewalt Australia